PI Expert Suite

PI Expert Suite

PI Expert® Suite v10.2 simplifies the
design of off-line power supplies and
DC-DC converters based on PI products.

New in PI Expert Suite

PI Expert Suite 10.2 improves design productivity with an enhanced schematics-manipulation tool and BOM output to enable you to quickly order the parts needed for prototyping. In addition, it includes a new Design Wizard to assist in selection of the right product for your design.

New Features in PI Expert v10.2
  • PI Expert now supports InnoSwitch3-CP and InnoSwitch3-Pro
  • InnoSwitch-3 EP/CP/Pro Families include additional parts with 750 V breakdown voltage
  • Calculation and Optimization Engine update for InnoSwitch-3 Families
  • CAPZero support
  • Added more high voltage ceramic capacitors to Component Database
  • Improved Post Filter Circuit components selection
  • Updated new Design Notifications
  • Major updates to Transformer Engine for all families:
    • Now supports use of Flying Leads for all transformer outputs
    • Support for uneven primary winding split and other enhancements
    • Magnet wire database update

New Features in PI XLs Designer v10.2

  • InnoSwitch-3 EP/CP/Pro Flyback spreadsheets – additional parts with 750 V breakdown voltage added
  • PI Xls now supports:
    • InnoSwitch3-EP 900V in Flyback topology
    • LinkSwitchTN2-900V in Buck topology
    • TinySwitch-LT in Flyback topology
    • LYTSwitch-6 in DCDC Flyback topology
  • Updates to several product spreadsheets:
    • LinkSwitch-HP (Flyback topology)
    • HiperPFS-4 (Boost topology)
    • LinkSwitch-TN2 (Buck Boost topology)
    • InnoSwitch3-EP (Flyback topology)
    • HiperTFS-2
  • Major updates to the Transformer Engine for all families:
    • Now supports use of Flying Leads for all transformer outputs
    • Support for uneven primary winding split and other enhancements
    • Double-coated wire database update

Learn more ... Watch the videos!

PI Expert Suite v10.2 consists of three components:

  • PI Expert: an automated, graphical user interface (GUI) driven program that takes power supply specifications and automatically generates a power conversion solution designed around one of Power Integrations' IC families. PI Expert gives you all of the necessary information to build and test a working prototype. This includes complete interactive schematic, bill of materials (BOM), board layout recommendations and detailed electrical parameter tabulations. PI Expert also provides a complete magnetic design that includes core size, number of turns, appropriate wire thicknesses and number of parallel wires to be used for each winding. Detailed winding instructions for mechanical assembly are also generated. The program reduces design time from days to minutes.

  • PI Xls Designer: PI Xls Designer is a spreadsheet based application that gives the power supply designer more control during the design process. Transformer construction support including detailed winding instructions for mechanical assembly is also generated. PI Xls Designer takes input, output and all other necessary design specifications and performs all the necessary calculations to design and evaluate a power conversion solution using Power Integration's ICs.

  • PI Viewer: a method for viewing design files created with older versions of PI Expert.

In addition, you can order transformer prototypes for PI Expert-generated designs through Power Integrations’ Rapid Transformer Sample Service (RTSS).  A quick-start guide describing how to create a compatible design file is available at https://ac-dc.power.com/design-support/rapid-transformer-samples/

Design Software Support Overview

Design Software
Support for
PI Products		PI ExpertPI Xls

DPA-Switch

X1X2

HiperLCS

 X5

HiperPFS

 X6

HiperPFS-2

 X6

HiperPFS-3

 X6

HiperPFS-4

 X6

HiperTFS-2

 X7

InnoSwitch3-CE

X1X1

InnoSwitch3-CP

X1X1

InnoSwitch3-EP

X1X1

InnoSwitch3-Pro

X1X1

InnoSwitch-CE

 X1

InnoSwitch-CH

 X1

InnoSwitch-CP

 X1

InnoSwitch-EP

 X1

LinkSwitch-II

 X3

LinkSwitch-3

 X1

LinkSwitch-4

 X1

LinkSwitch-CV

X1X1

LinkSwitch-HP

X1X1

LinkSwitch-LP

 X1

LinkSwitch-PH

X1X8

LinkSwitch-PL

X1X15

LinkSwitch-TN

 X4

LinkSwitch-TN2

 X4

LinkSwitch-XT

X1X1

LinkSwitch-XT2

 X1

LinkZero-AX

 X1

LinkZero-LP

 X1

LYTSwitch-0

 X12

LYTSwitch-1

 X16

LYTSwitch-2

 X1

LYTSwitch-3

 X10

LYTSwitch-4

 X11

LYTSwitch-5

 X10

LYTSwitch-6

X1

LYTSwitch-7

 X12

TinySwitch-III

X1X1

TinySwitch-4

X1X1

TinySwitch-LT

X1

TOPSwitch-HX

X1X1

TOPSwitch-JX

X1X1

NOTES:

  1. Only supported in the Flyback topology
  2. Supported in both the Flyback and Forward topologies
  3. Supported in both the Flyback and Tapped-Buck topologies
  4. Supported in Flyback, Buck and Buck-Boost topologies
  5. Supported in LLC Resonant topology
  6. Supported in Boost topology
  7. Supported in Two Switch Forward topology
  8. Supported in Flyback and Buck topologies
  9. Supported in Flyback, Tapped-Buck, Buck and Buck-Boost topologies
  10. Supported in Flyback, Buck, Buck-Boost and Tapped-Buck Boost topologies
  11. Supported in Flyback, Buck and Tapped-Buck topologies
  12. Supported in Buck topology
  13. Supported in Flyback, Buck, Buck Boost and Tapped-Buck topologies
  14. Supported in Flyback, Buck, Boost, Buck-Boost and Tapped-Buck Boost topologies
  15. Supported in Flyback, Buck, Boost, Buck-Boost and Tapped-Buck topologies
  16. Supported in Buck and Buck-Boost topologies
  17. Supported in Switched Valley-Fill PFC with Flyback topology
  18. Supported in Flyback and Switched Valley-Fill PFC with Flyback topologies


Get PI Expert!

Download PI Expert Suite v10.2 (contains PI Expert, PI Xls and PI Viewer)


Installation Instructions

For users installing PI Expert Suite for the first time:

  1. Download and run the PI Expert Suite v10.2 installer to install all tools (PI Expert, PI Xls, and PI Viewer).
  2. Assuming that you left the "Yes, check for program updates" box that appears during the install checked, the installer will check for updates before it completes the installation. To take advantage of this feature, ensure you have the "Yes, check for program updates" box checked, have an Internet connection, and then click Finish. The InstallShield program will check for updates for each tool that you installed, and automatically download and update the software to support the latest products. Follow the prompts to update all of the tools to the latest version.
  3. If your machine is 64 bit compatible you can install the 64 bit version of the software which can speed up the optimization process by taking advantage of larger system memory. The 32 bit version will work on a 64 bit system but the 64 bit version will not work on a 32 bit system.


Get PI Expert Technical Support

Frequently Asked Questions

PI Expert Suite Support Forum