High Voltage SMPS Requirement
I am just starting a project and I have a requirement for a new PSU, the PSU requirements are quite challenging!
The input requirement comes from a three phase rectifier, ideally I would want a 1200VDC bus input (but 750VDC may also be acceptable).
The output requirement would ideally be 24VDC, 500W. Though I would be interested in anything you could provide over 100W.
This PSU would also have to operate over an ambient temperature range off -30C to +85C (if -50C was possible that would also be a bonus!).
The PSU does not need to have an isolated output, I can run this circuitry “hot”.
I understand these requirements are challenging, I would be interested to know if you provide anything which would be suitable.
we don't have product meet this requirement.