Using HiperTFS as two-switch forward converter only
Posted by: xavier.martinez
on
Hi,
we are evaluating the use of the TFS762HG device as the main component of a power supply. In our system, we just need one output of 28V @ 10A. Is there any problem of using this device without the flyback stage? Do you have any suggestion or any consideration that we shall take in account?
Thanks.
Hi,
You are free to use the power supply without the flyback stage.This will not be a problem.
Please follow the guidelines offered in our application note for HiperTFS. I am providing a link below for your reference:
http://www.powerint.com/sites/default/files/product-docs/an51.pdf
I would also encourage you to download PIExpert and use the tool for your design:
http://www.powerint.com/en/design-support/pi-expert-design-software
Thank you for considering Power Integrations and HiperTFS for your application.
Regards
PI-Sarek