Solution Finder Get Tech Support

LNK PL in DC voltage

Posted by: Osnirok on

Is it possible to use LNK PL in DC voltage input? considering that is necessary to do some adjustmet in R sense to obtain the desired output curret.  

Comments

Submitted by PI-Jono on 07/09/2014

Hi,

LNK-PL is not designed for DC input.  It was optimized for high PF and low THD application.

The IC requires AC signal to set the internal clock and to maintain regulation.

Use LYT-0 for DC input application.

Regards,

Jono