Solution Finder Get Tech Support

Missing Library's of Power Integration Library in Power Esim

Posted by: jacob3204 on

Hi,
Why we cannot see PI parts in Power esim (which i think has better magnetic builder and simulation tool) tool in which PI is a partner
https://www.poweresim.com/index2.jsp?topologytype=76&deduct=177&InitNow=T&pc=41513

Jacob

Files

Attachment Size
power_esim_lib.JPG 139.05 KB

Comments

Submitted by PI-ODO on 12/01/2019

Hi Jacob,

PowerEsim is indeed a partner with PI. Which PI parts are you seeking in particular? If they are not already supported, we can make a request to have them added.

-PI-ODO

Submitted by jacob3204 on 12/02/2019

Hi,,
Please see attached
I selected a simple flyback schematics
Power integrations selected as vendor
However i cannot see any parts
The part iam interested in was TOP264EG

Attachment Size
FLYBACK.jpg 296.5 KB
Submitted by PI-ODO on 12/05/2019

Hi Jacob,

Thank you for the additional information. I will check with PowerEsim and let you know what I find out.

-PI-ODO

Submitted by PI-ODO on 12/06/2019

Hi Jacob,

I connected with PowerEsim, and here is the procedure to access our TOPSwitch-JX PWM circuit models.

Go to the Topologies page and click any topology in Integrated Switch Flyback, or click “Flyback PWM+S AC/DC” on the front page under “Start a Design from Topology." Then click the PWM module headline and select TOPSWITCH JX.

Hopefully, that works for you.

-PI-ODO