ソリューション ファインダー 技術サポート

2Volt Drop in the 12Volt o/p

Posted by: arunsoman on
My supply showing 10.8V When realay operating.at 12V o/p. and the current at the 5Volt o/p varies between 0.18A to 0.2A ,-5Volt o/p not Showing any currrent. Please give me any solution.

Files

Attachment サイズ
Heatcon Schematic_9 25W_tny277PN_0_0.pdf 31.28 KB

コメント

Submitted by PI-Sarek on 11/19/2008

Hi,

From your email it appears that the regulation of your 12V output is poor and you would like to improve it.

In a multiple output flyback converter with only one output regulated using the feedback circuit, the additional outputs which are cross regulated, will suffer from voltage variation especially for a large change in load current. For such applications it is benificial to use a weighted feedback circuit. In a weighted feedback circuit, the output voltage is regulated by using a circuit that weighs the output voltage of multiple outputs. Although this results in slight degradation of the voltage regulation of the main regulated output, it helps to limit the variation of the additional outputs.

Please see AN-22 for reference (specifically page 12). Please use the link below to download AN-22.

http://www.powerint.com/sites/default/files/product-docs/an22.pdf

Should you continue to experience a problem, please contact our office in India. Our Application engineering group in India will be able to help you resolve the issue.

contact information of our office in India is as follows:

INDIA
# 1, 14th Main Road
Vasanthanagar
Bangalore 560052 India
+91-80-4113-8020
+91-80-4113-8028
FAX: +91-80-4113-8023
E-mail: indiasales@powerint.com

Regards

PI-Sarek