DPA switch

2 posts / 0 new
Hi, for a new design I need a power supply with input voltage range 18Vdc...50Vdc 2 separated outputs : 5V - 1.5A and 12V - 0.5A. Is that possible with a DPA device (or another device)?

DPA-Switch is specified down to 16 V so should work here.

I used parametric search

http://www.powerint.com/en/design-support/parametric-search#5000

and came up with

http://www.powerint.com/sites/default/files/PDFFiles/der120.pdf

which is a good starting point.

Cheers

PI-Chekov